Air Accessories

The FAT HOSE Kit for the Tippmann Cyclone Feed is the best and easiest way to get more from your loader. With the FAT HOSE Kit your loader will perform better at lower pressures. The larger hose gauge allows more air to reach the Cyclone Feed Actuator...

Replacement bonnet/thread for the Ninja Pro V2 HPA System.  Works with Ninja Pin Valve Regs Only. Replacement Pin and Spring Included.  Can be used to replace the older Ninja Ball Valve Bonnet.

Ninja's Microbore remote lines are 30% lighter than traditional remotes.  These extremely flexible lines are easier to use and work through your gear than traditonal remotes.  All Microbore lines have a working pressure of 4500 psi and can be...

Ninja's Microbore remote lines are 30% lighter than traditional remotes.  These extremely flexible lines are easier to use and work through your gear than traditonal remotes.  All Microbore lines have a working pressure of 4500 psi and can be...

Ninja's Microbore remote lines are 30% lighter than traditional remotes. These extremely flexible lines are easier to use and work through your gear than traditonal remotes. All Microbore lines have a working pressure of 4500 psi and can be used with any...

Ninja's HPA Whip Fill Hose is now available in their Microbore Line. The Micobore line is 30% lighter and smaller than standard remote lines while maintaining the same airflow volume. It is not only flexible but has the same working pressure as...

Walther 88 gram CO2 Capsules. (2 pack) Warning! CO2 can only be shipped via standard ground TO ALL SHIPPING LOCATIONS due to air shipping restrictions. CO2 is not shipped at all to Alaska, Hawaii, or Puerto Rico. If "2nd Day" is selected, it will be...

Move your tank to a pouch and lighten your markerDesigned to work with co2 tanks, 3000 psi, and 4500 psi HPA systemsHigh flow coiled hose for unrestricted movementInternal lock prevents the loss of the adjustment knobCA Adapter attaches to any paintball...

Move your tank to a pouch and lighten your markerDesigned to work with co2 tanks, 3000 psi, and 4500 psi HPA systemsHigh flow coiled hose for unrestricted movementInternal lock prevents the loss of the adjustment knobCA Adapter attaches to any paintball...

This 3,000 psi remote coil hose kit attaches easily to the tank adapter and works with any paintball air system or CO2 bottleTippmann Part # - H-01 (TP01032)

Tippmann's Connex Remote Line allows you to easily lighten your marker set-up by relocating your tank to a harness or tactical vest system. The coil line stretches to over 3 feet allowing you to move freely then re-coiling when in tight spots to stay out...

The Tippmann 48/3000 HPA Tank is composed of durable aluminum topped off with a quality regulator yielding an output pressure of 800psi. It is both DOT and PI Certified.Tippmann Part Number: T299100Please note:  This item is new but has an older...

Distributed by Tippmann Sports, this refillable tank meets or exceeds ASTM standards. Features new Safe Link safety valve. Expect 800-1000 shots per fill.Tippmann Part Number: 20T-R

Distributed by Tippmann Sports, this refillable tank meets or exceeds ASTM standards. Features new Safe Link safety valve. Expect 500-800 shots per fill.Tippmann Part Number: 12T-R

Testing and/or permanent in-line regulator adapter. Interchangeable thread system allows adapter to be used with any regulator thread, as well as allowing the gauge to be positioned anywhere. The perfect addition to any techs tool box.

Made from stainless steel, the TechT Lo-Pro Fill Nipple is 25% smaller when installed. Inner Allen head design makes installation easy. Compatible with all HPA systems. Kit includes check valve. TechT Part: FN003