Designed for the CO2 20oz, nitro or HPA player. The player that needs the big drop for the big tank. It moves your tank 5.5 inches forward and 2.5 inches down. Will work with all CO2 tanks under 5.5 inches in diameter. It also includes an extra 1/8 NPT hole for a gauge if you need it. You can either leave the plug in, or remove the plug to install a gauge. The hole is plugged when you get it but not sealed. If you wish to keep the plug in, you will need to apply thread sealer to the plug. It has holes drilled to mount either standard or Spyder grip frames.

This design has the On/Off valve with degassing feature. As you loosen the knob it will empty your gun (but not your tank) of air. Now you're able to unscrew your tank and not have to worry about residual trapped air or pulling the trigger to rid your gun of the air. No more torn up tank o-rings. Because of the many different styles of marker that is available, Dead On Paintball does not provide the mounting screws for this item. In most cases, the existing stock screws on your gun should work. It may also be necessary to purchase additional gas line and fittings to allow this product to work with your particular marker.