Categories

 Loading... Please wait...

Ninja Paintball Tank PRO SHP Regulator - 4500psi

Product Code: NIN-reg-4500-shp
$59.95

Ninja Paintball Tank PRO SHP Regulator - 4500psi

Product Code: NIN-reg-4500-shp
$59.95
Availability
Usually Ships in 24 Hours
Shipping
Calculated at checkout
Out of Stock

Ninja Paintball Compressed Air Tank Regulator Valve - Pro SHP (Super High Pressure) 1100 psi (adjustable down to 950 psi) Output ­ 4500 psi.

This regulator was built specifically for markers that require a high input pressure such as the Tippmanns.

The SHP will regulate the airflow coming out from the tank down to a 1100psi output pressure and can be adjusted further to 950 psi. With the rebuildable design, you can easily remove the top of the regulator to clean and maintain it.

Ninja PRO SHP Regulators include an aluminum bonnet and mini guage. The PRO SHP also features a rotational fill to position the fill nipple in any direction you desire.

Regulator replacement should only be done by a qualified Airsmith. Please contact your local paintball shop or Ninjapaintball.com for installation.

Features:
MADE IN THE USA!!!
Aluminum bonnet
Mini Pressure Gauge
SHP has non-adjustable output - factory set at 1100psi (Adjustable to 950 psi)
Completely rebuildable by the user
Every regulator is hand crafted and factory tested
Super low response curve 0-50 PSI from full to empty
Meets all DOT, CGA and ASTM specifications
ASTM COMPLIANT bonnet thread
ASTM COMPLIANT DOT bottle burst disk
ASTM COMPLIANT Low pressure burst disk
ASTM COMPLIANT Restrictor, bleed hole and safety groove

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

  • Product Description

    Ninja Paintball Compressed Air Tank Regulator Valve - Pro SHP (Super High Pressure) 1100 psi (adjustable down to 950 psi) Output ­ 4500 psi.

    This regulator was built specifically for markers that require a high input pressure such as the Tippmanns.

    The SHP will regulate the airflow coming out from the tank down to a 1100psi output pressure and can be adjusted further to 950 psi. With the rebuildable design, you can easily remove the top of the regulator to clean and maintain it.

    Ninja PRO SHP Regulators include an aluminum bonnet and mini guage. The PRO SHP also features a rotational fill to position the fill nipple in any direction you desire.

    Regulator replacement should only be done by a qualified Airsmith. Please contact your local paintball shop or Ninjapaintball.com for installation.

    Features:
    MADE IN THE USA!!!
    Aluminum bonnet
    Mini Pressure Gauge
    SHP has non-adjustable output - factory set at 1100psi (Adjustable to 950 psi)
    Completely rebuildable by the user
    Every regulator is hand crafted and factory tested
    Super low response curve 0-50 PSI from full to empty
    Meets all DOT, CGA and ASTM specifications
    ASTM COMPLIANT bonnet thread
    ASTM COMPLIANT DOT bottle burst disk
    ASTM COMPLIANT Low pressure burst disk
    ASTM COMPLIANT Restrictor, bleed hole and safety groove

  • Product Video
  • Product Reviews

    Product Reviews

    Write Review

    This product hasn't received any reviews yet. Be the first to review this product!

Ninja Paintball Compressed Air Tank Regulator Valve - Pro SHP (Super High Pressure) 1100 psi (adjustable down to 950 psi) Output ­ 4500 psi.

This regulator was built specifically for markers that require a high input pressure such as the Tippmanns.

The SHP will regulate the airflow coming out from the tank down to a 1100psi output pressure and can be adjusted further to 950 psi. With the rebuildable design, you can easily remove the top of the regulator to clean and maintain it.

Ninja PRO SHP Regulators include an aluminum bonnet and mini guage. The PRO SHP also features a rotational fill to position the fill nipple in any direction you desire.

Regulator replacement should only be done by a qualified Airsmith. Please contact your local paintball shop or Ninjapaintball.com for installation.

Features:
MADE IN THE USA!!!
Aluminum bonnet
Mini Pressure Gauge
SHP has non-adjustable output - factory set at 1100psi (Adjustable to 950 psi)
Completely rebuildable by the user
Every regulator is hand crafted and factory tested
Super low response curve 0-50 PSI from full to empty
Meets all DOT, CGA and ASTM specifications
ASTM COMPLIANT bonnet thread
ASTM COMPLIANT DOT bottle burst disk
ASTM COMPLIANT Low pressure burst disk
ASTM COMPLIANT Restrictor, bleed hole and safety groove

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Find Similar Products by Category

Recently Viewed items