In Stock
TechT Paintball

TechT Paintball MRT Pro Series Bolt - Phenom X7

No reviews yet Write a Review
Usually Ships in 24 Hours
Calculated at Checkout
Current Stock:

Frequently Bought Together:

TechT Paintball MRT Pro Series Bolt - Phenom X7
Inc. Sales Tax
Ex. Sales Tax


The TECHT MRT (MASS REDUCTION TECHNOLOGY) Pro Series Phenom Bolt (Bad Karma Edition) has been engineered with efficiency and consistency as the most crucial design elements. We have also added a soft touch face to our Phenom bolt which will significantly decrease ball breakage. TechT's MRT system minimizes excess weight by removing portions of the bolt which are not utilized. The spiral cut pattern allowed TechT to lengthen the channels of material to be removed, this results produce a very dynamic looking bolt. Players that upgrade to the MRT Pro Series Phenom Bolt will see significant increases in efficiency and the elimination of ball breakage typically associated with the stock Phenom bolt. The TECHT MRT Pro Series Bolt is made of a combination of aircraft grade aluminum and delrin which result in a super light design. As with all of our products it carries a Full Lifetime Warranty.

The TechT MRT Pro Series Phenom Bolt utilizes the stock spring. In our testing they found that changing to a different spring (lighter spring) caused issues with the cyclone feed loading correctly. TechT saw increases of 30 FPS when changing out the stock bolt for the MRT Bolt. The tremendous increase in efficiency is due to the combination of the soft-touch face- which helps seal the off the barrel when fired, the tremendous change in weight and the high flow face. The sound signature is also greatly reduced when adding the MRT Bolt.

All MRT Phenom Bolts will come with our Phaze-5 Air Fitting for the Cyclone Feed. The Phaze-5 Fitting allows more air to get to the cyclone feed and actuate the paddles more consistently. The TechT Phaze-5 Fitting is manufactured from stainless steel which makes it a much more durable replacement for the stock plastic fitting. The Phaze-5 Fitting must be installed to allow the MRT Phenom Bolt to work properly in conjunction with the Cyclone Feed System. Please watch TechT's install and troubleshooting video to insure that your TechT MRT Phenom Bolt is installed properly.

When the TechT Pro Series Delrin MRT Bolt is combined with our Phaze-5 High Flow Air Fitting, players will be able to run at lower operating pressures and higher rates of fire. The Phaze-5 High Flow Air Fitting allows the Cyclone feed to run more consistently with the extremely lightweight design of the TechT Pro Series MRT Bolt.

Aircraft Grade Aluminum
Soft Anti-Chop Tip O-ring
Teflon Coated for wear resistance
Increases Efficiency
Decrease Marker Pressure

Customer Reviews

Customers Also Viewed

Don't Miss Out!

Join Our VIP NEWSLETTER For Sales And New Product Releases.