SELECT A REG - Ninja Paintball 13ci 3000psi Aluminum HPA Tank

Ordering is easy. Just decide on the tank size and finish. Then select your model of Ninja Regulator from the drop-down box and add your tank to your cart.

Tank: Ninja 13ci Black Aluminum Tank.

Regulator Options:

All Pro V2 Regulators now feature a ball seal, 30% better air flow, rotational 360 degree collar and adjustable pressure via shims.  Please note the Ultralight Regulator is not a PRO V2 Reg.

1. Ninja PRO V2 Standard - Features a rotating collar allowing your gauge and fill nipple to align in the position you want in relation to the marker. Pro Regs are adjustable for 800psi, 650psi, 550psi and 450psi. They ship from the factory set at 800psi. Pro regs include an aluminum bonnet and mini guage.  

2. Ninja PRO V2 SLP - SLP stands for 'Super Low Pressure' and is factory set at 300 psi. This regulator was built specifically for the Bob Long Victory and G6R Paintball Guns to get maximum performance out of these paintball markers. Ninja PRO V2 SLP Regulator includes an aluminum bonnet and mini guage and also features a rotational fill to position the fill nipple in any direction you desire.  

3. Ninja PRO V2 SHP - SHP stands for 'Super High Pressure'. It is factory set at 1100 psi and is adjustable down to 950 psi. This regulator was built specifically for markers that require a high input pressure such as the Tippmanns. Ninja PRO SHP Regulators include an aluminum bonnet and mini guage. The PRO V2 SHP also features a rotational fill to position the fill nipple in any direction you desire.  

Features:
13 cubic inch
3000 psi
D.O.T. Approved Aluminum bottle
5 year hydro
.96 pounds!!!! 
9 3/8 inches long x 2 inches diameter
1 3/8 inches bottle to ASA
Gives you 125 shots per fill depending on marker.

MADE IN THE USA
IDEAL FOR SCENARIO PLAY OR SPARE AIR
SRT piston - Sonic Recharge Technology piston - plated aluminum piston that produces an industry leading recharge rate and virtually eliminates reg shoot down
SPA - Shim Pressure Adjustment- change output pressure by adding or removing shims, not springs or pistons
MFV - Mini Fill Valve - Non wrist digging, low profile design fill valve
All black tactical look
Brass or optional Aluminum bonnet - see regulator parts for details
Meets all DOT, CGA and ASTM specifications
Completely rebuildable by the user
Every regulator is hand crafted and factory tested
Super low response curve 0-50 psi from full to empty
Safety
ASTM COMPLIANT bonnet thread
ASTM COMPLIANT DOT burst disc
ASTM COMPLIANT Low pressure burst disk
ASTM COMPLIANT Restrictor, bleed hole and safety groove
Mini Fill Valve IS hardened, plated 5000 psi rated
Reg installed to ASTM specifications